Ring Size Guide & Chart for International Customers
Introduction
Getting the right ring size is a must when you go for shopping a ring, especially when you shop the ring online from an e-commerce store. Also, in the case of engagement rings, where you invest a lot in selecting the perfect ring and planning the proposal, it is natural for you to have the desire that the ring fits right out of the box. Through this blog, we will clarify some of the common myths that surround the topic of ring sizes and help you with great tips on how to determine the proper ring size. We will also give you the international ring size chart, so you can get the ring size right once you properly measure your finger. Read this ring size guide so you can ensure that the size of the ring that you order is perfect and as per your needs.
The Ring Size Guide: How To Correctly Determine The Ring Size
How To Properly Measure Ring Size at Home:
Measuring ring size at home is not difficult. There are a couple of ways through which you can measure your ring size at home. The most simple way is to use a thread or a strip of paper. First, we shall discuss how can you measure the ring size through paper.
For measuring the ring size with paper, cut out a rectangular strip of paper with 3 to 4 inches width and 5 inches length. While cutting, make sure that the length of the paper is enough to fit around your finger. Then, wrap the paper around your finger. Make sure that the paper does not fit too tight, rather, see that it is comfortable, and provides a snug fit. Then, mark the paper where the two ends meet. Scratching where the paper edges is also not a bad idea either. Lastly, measure the length of the paper from its tip to the point where you have marked the paper. The resulting length is the circumference of your finger.
If you do not want to use paper, you can also employ the use of a floss or a thread. Take a thread (or floss) and fold it over the base of your finger. Mark the part of the thread where it first covers and makes one circle with a pen. Then, use a ruler or a measuring tape to measure the circumference of your finger. Here is a special note for you if you are using a thread – don’t use a thread that can stretch. Also, with paper, don’t use paper which can get easily damaged because of the moisture on your fingers.
Once you have the exact measurement of the circumference of your finger, use the ring size chart below to find the corresponding ring size. If you are buying your ring online, remember that different countries have different ring-size systems, and hence, your ring size varies with the location where your online jeweler is located, or which country standard he is using. Below is a comprehensive ring size chart:
International Ring Size Chart
Go To A Brick-and-Mortar Jewelry Store And Ask Them To Measure Your Ring Size:
The best way to get your ring size is by paying a visit to the local jewelry store near you and letting the jeweler determine your ring size. Most probably, the jeweler will use a set of finger gauges, which are often known as ring sizers, that contain a set of metal bands in 0.5-size increments. These metal bands are slid onto your fingers for measuring the most secure fit which is the most comfortable for you. The biggest reason why you should go to a jeweler for measuring a ring size is, that he will factor in the effect of humidity, temperature, altitude, and even the time of the day, which affect the finger size. Thus, going to a jeweler will take the guesswork out of the process and give you the exact measurement.
If you are getting a ring made for someone, say, an engagement ring for your future spouse, and you need to keep the element of surprise, we advise you to borrow the ring from her jewelry box and take that ring to the jeweler. All you have to remember in this particular process is which finger of which hand the ring belongs to. In the case of an engagement ring, you need to take the ring that belongs to the ring finger of your partner’s left hand. Once the jeweler gets your ring, he will typically use a ring mandrel, which is a tapered cylindrical tool marked with ring sizes. By measuring the size through the ring mandrel, you will get the exact ring size.
Other Ways Of Measuring Ring Size:
If you are looking to secretly measure the size of the ring of your partner, because you want to propose to them with an engagement ring, you can use soap. Press one of the rings she wears on her ring finger into a bar of soap until it creates a proper impression. Once you have the impression, remove the ring and clear any residue by wiping and cleaning the ring – so she doesn’t become suspicious. Bring soap with an impression of the ring on it to your jeweler, and he will use the markings on the soap to determine your partner’s ring size. If you don’t want to use the soap technique, you can even use a pencil and trace the inside of her ring on a piece of paper.
Some More Tips on Ring Sizes
If you are trying to secretly find the ring size of your partner so that you can propose to her with a beautiful engagement ring, but you feel nervous when it comes to determining her ring size, here are a few extra tips for assuring that the ring you get will be perfect for her:
- You should buy a larger ring. The reason is, that it is comparatively easier to remove metal from a ring that’s big than adding metal to a ring that is too small.
- The weather, attitude, and time of day also affect your ring size. Your fingers tend to shrink in cold and swell in the heat. This is why, not only can the measurement of your ring size taken in the winter season differ from the one taken in the summer season, but the measurement taken in the afternoon can also differ from the one taken in a cool morning. Similarly, humidity also affects the size of the finger and causes them to shrink or swell.
- Try to get a ring that offers a snug fit. The ring should offer a close-fitting on her finger, where it is neither too tight to cause discomfort nor too loose. Also, ensure that the ring can slide over her knuckles, but, also make sure that the ring does not accidentally fall off while working, playing, or even while washing her hands or doing the dishes.
- While getting the ring size, also remember that shank size too matters. Generally, the shank size is about 40% to 45% of the head size. Also, rings with wider shanks need to be a little larger, as they fit in the finger more snugly. Make sure that you consult your jeweler about how to move forward when it comes to shank size.
Conclusion
Now that you are armed with the knowledge of how to determine the proper ring size, you can easily go out and determine which ring would fit you perfectly. This is especially helpful when you are shopping for a ring from an E-commerce store, or perhaps when you are buying a ring as a gift. The above ways of determining the ring size as well as the important tips on ring sizes will definitely help you on your quest to buy the ring of your choice.
Are you a jewelry retailer looking for online wholesale gemstone jewelry manufacturers from whom you can buy rings, or jewelry in general? If yes, then visit the online store of Rananjay Exports, India’s top wholesale gemstone jewelry manufacturer and supplier – they deal in all types of jewelry, including sterling silver jewelry and gemstone jewelry. On their official website, you can find jewelry in over 250+ gemstones, such as Moonstone Rings, Opal Rings, Larimar Rings, Turquoise Rings, Moldavite Rings, and Libyan Desert Glass Rings. You can also order Handmade Jewelry, Custom Jewelry, Casting Jewelry, Designer Jewelry as well as jewelry by gram from Rananjay Exports. We hope that this ring-size guide helped you out. Have a good day!
